Pulse / CW laser power supply for diode-pumped lasers is designed to supply diode arrays, that are used for the pumping of high-power solid-state or fiber lasers. Power supply is designed for operation in the laboratory, educational, experimental and industrial applications. Additionally the power supply can be equipped with a thermal stabilization controller (TEC controller). Also it has current limit, duty cycle limit and safety interlocks. Could be modified by a customer's request for the optimal selection of parameters for a specific load.
Specifications:
SF530
SF550
pulsed mode
CW
pulsed mode
CW
Pulse rate* (F)
1-500 Hz, single mode
-
1-1000 Hz, single mode
-
Output voltage* (V)
0-160 V
0-160 V
0-200 V
0-200 V
Output current* (I)
1-300 А
1-150 А
1-300 А
1-150 А
Pulse duration* (τ)
50-1000 μs
-
50-1000 μs
-
Rise time**
<60 μs
-
<60 μs
-
Fall time**
<60 μs
-
<60 μs
-
Output current tolerance
0.3 %
0.3 %
0.3 %
0.3 %
Average output power* (P)
2.5 kW
2.5 kW
4.6 kW
4.6 kW
Data display
LCD
LCD
Communication interface***
RS232
RS232
Trigger in
5 V, 10 μs
5 V, 10 μs
Trigger out
5 V, 10 μs
5 V, 10 μs
Interlock
switch contact closure
switch contact closure
Cooling
air / water cooled
air / water cooled
Power Input
single phase 220 VAC, 50Hz
three phase 220/380 VAC, 50Hz
Dimensions
440*132*440 mm; 3U
440*132*485 mm; 4U
Weight
20 kg
25 kg
Check your power supply
Input parameters:
Pulsed mode
CW mode
Hz
V
V
A
A
μs (microsec)
{{ areaa }}
{{ areab }}
> {{ result }} <
F*V*I*τ≤P (pulse mode); V*I≤P (CW mode)
* Values are limited by average power: F*V*I*τ≤P (pulse mode); V*I≤P (CW mode)
**With a length of laser diode power wire is not more than 2m
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead in /www/vhosts/fedalel.com/en/include/spets.php on line 6
(812) 326-07-48
To return on the main
